Add a little of alcohol (5 mL), then the final volume was made up

Add a little of alcohol (5 mL), then the final volume was made up to the mark with alcohol, shaken well and filtered through a Whatman filter paper No. 40. Convenient aliquots

from this solution were taken for the assay of TL. Studies on interference by some common excipients such as magnesium steratae, starch and talc were studied by mixing known amount of TL (10 mg) with specified amounts of the excipients in their recommended percentages [23] find more and the recovery of the drug was followed as above. Robustness was studied by estimating the amount of TL in tablet by making slight changes in wavelength of estimation and dye’s concentration and dyes quantity (mL). Ruggedness is defined there as the degree of reproducibility of the test results obtained under different regular test conditions, likewise different laboratories, different analysts etc. To

study the stability of chromogen, specified quantity of stock solution of TL was mixed with optimized quantity of buffer and MO and kept aside for reaction and extracted with chloroform. The results are depicted in Fig. 2. A maximum absorbance λmax was noted at 420 nm and the same was used throughout the method development and validation. From the trials it was noted that formation of color was not required any buffer but for complete extraction of any basic drug form its salt it need a little of acidic buffer for this here in we used potassium dihydrogen phosphate buffer of pH 4. In case of solvent suitability for extraction various solvents SKI-606 mw were tested and found chloroform is more favorable than other for extraction. The chloroform suitability for extraction of ion-pair is also supported by other researchers. 18, 19, 20, 21 and 22 A volume of 1 mL of MO (0.05% w/v) was found to be optimal for complete complexation as discussed in the latter section on effect of MO concentration. Cationic

nitrogen of TL can aid for the formation of an ion-association complex easily with the anionic azo dye MO. The Job’s continuous variation method was used to establish the drug-dye stoichiometric and it was found the MO and TL for a 1:4 association complex.25 not The formed TL–MO complex is held together by an electrostatic force of attraction ions they act like a single unit Fig. 3. To Beer’s law standard plot was constructed by plotting the absorbance of chromogen against its concentrations (μg mL−1). Results of linearity were given in Table 1 and Fig. 4. The regression equation for the results was as follows: A=0.0472x−0.1622(r=0.9950)where A, the absorbance at 420 nm, x, concentration of TL in μg mL−1 and r, correlation coefficient. Other optical characters such as molar absorptivity (Є) and Sandell’s sensitivity were also calculated and presented in Table 1. The LOD and LOQ were 0.06 and 1.5 μg mL−1 respectively.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>