The main tools used by the participating workers were grinders, die grinders and hammers with vibration intensity ranging from 1.5 to 10 m/s2. HAV exposure was given in time (hours) and acceleration level (m/s2) in accordance with International Organization for Standardization (ISO) guidelines (European Council; ISO:5349-1; ISO:5349-2). The product of exposure hours (h) and of hand-arm acceleration (m/s2) was used as the cumulative HAV exposure dose (unit h m/s2). As AZD1480 mouse an example, a worker who operates a hand-held vibrating tool with the intensity of 2.5 m/s2

(the EU action level) during 8 h per working day and 220 working days per year for 1 year ends up with an exposure dose of 4,400 h m/s2. The cumulative dose of HAV in 2008 was calculated from measurements and questionnaires in 1987, 1992, 1997, 2002 (only questionnaire) and 2008.

Current exposure, as in using hand-held vibrating tools at the time of follow-up (2008), was recorded in acceleration (m/s2) and given in A(8) values (ISO:5349-1) that ranged from 0.0 to 2.1 m/s2 with a mean of 0.50 m/s2 and standard deviation (SD) of 0.80 m/s2. Quantitative tremor measurements The subjects were asked (in advance) to refrain from HAV exposure and nicotine use, on the day of testing. The measurements were conducted by an experienced physiotherapist. The CATSYS Tremor Pen® was used for measuring postural tremor (DPD 2000). The equipment consists of a biaxial micro-accelerometer embedded in a low-mass Nutlin-3a datasheet stylus (12 cm × 0.8 cm), which is sensitive PCI-32765 ic50 when perpendicular to the central axis of the stylus, and has been standardized and validated (Despres et al. 2000; Edwards and Beuter 1997). For the testing procedure, the participants were asked to sit in a chair and hold the stylus as they would hold a writing pen, with the elbow joint bent at an angle of 90°, and to avoid contact. The stylus was held horizontally about 10 cm in front of the navel. Tremor was recorded successively in each hand over 16.4 s. The participant was asked to look at the tip of the stylus and breathe normally during recording. The tremor registrations were displayed in real

time on a time axis plot on the computer screen. Fourier transformation was used to determine the power distribution AMP deaminase across a frequency band varying from 0.9 to 15 Hz. Four different measures calculated by the CATSYS software were used: tremor intensity, center frequency, frequency dispersion and harmonic index (Table 1). Table 1 Definitions of measures used to characterize postural arm tremor recorded with the CATSYS system (Despres et al. 2000; Wastensson et al. 2006) Characteristicsa Definitions Tremor intensity, (m/s2) The tremor amplitude given in root-mean-square of acceleration (m/s2) recorded in the 0.9- to 15-Hz band. Higher values indicate more tremor Center frequency (CF), (Hz) The median frequency of the acceleration in the 0.9- to 15-Hz band.